Examples
13.5 Testing the example
FM 352 electronic cam controller
154 Operating Instructions, 05/2011, A5E01071724-03
13.5 Testing the example
Procedure
After you have successfully completed all necessary entries, download the entire block folder
to the CPU.
The example programs include variable tables (VATs) you can use to view and change data
blocks online (i.e., in CPU RUN mode).
1. From the variable table, select the "Symbol" and "Symbol Comment" views.
2. Open a variable table.
3. Open the variable table with the configured CPU, and monitor the variables cyclically.
This updates the variables dynamically when the CPU is in RUN mode.
All the examples require that the machine data and cam data were entered and saved using
the parameter assignment interface. This allows you to work through the examples
sequentially.
13.6 Reusing an example project
Restrictions
The code of the samples in neither optimized nor designed for all eventualities.
Error evaluation is not programmed in detail in the sample programs in order to avoid the
programs becoming unwieldy.
To Next Page
Loading...
