Siemens Simantic ET 200S - 4 DO 24 VDC;2 a Standard Digital Electronic Module (6 ES7132-4 BD31-0 AA0)

Digital electronic modules
3.16 4DO 24 VDC/2 A Standard digital electronic module (6ES7132-4BD31-0AA0)
ET 200S
3-64 Manual, Edition 10/2005, A5E00514527-01
3.16 3.16 4DO 24 VDC/2 A Standard digital electronic module
(6ES7132-4BD31-0AA0)
Properties
• Digital electronic module with four outputs
• Output current 2 A per output
• Rated load voltage 24 VDC
• Short-circuit protection
• Suitable for solenoid valves, DC contactors, and indicator lights
Peculiarity
When you connect the 24 VDC rated load voltage to the power module by means of a
mechanical contact, depending on the circuit the digital outputs carry the "1" signal for
approximately 50 µs. You need to take this into account if you connect the module to fast
counters.
General terminal assignment
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal assignment for 4DO 24 VDC/2 A Standard (6ES7132-4BD31-0AA0)
Terminal Assignment Terminal Assignment Notes
1 DO
0
5 DO
1
2 DO
2
6 DO
3
3 M 7 M
4 M 8 M
A4 AUX1 A8 AUX1
A3 AUX1 A7 AUX1
• DO
n
: Output signal, channel n
• M: Ground
• AUX1: Protective-conductor terminal or potential bus (freely usable
up to 230 VAC)