Siemens Simantic ET 200S - TM-PF30 S47-F1 Terminal Module for PM-D F DC24 V Profisafe (3 RK1903-3 AA00)

Terminal modules
1.5 TM-PF30S47-F1 terminal module for PM-D F DC24V PROFIsafe (3RK1903-3AA00)
ET 200S
Manual, Edition 10/2005, A5E00514527-01
1-7
1.5 1.5 TM-PF30S47-F1 terminal module for PM-D F DC24V PROFIsafe
(3RK1903-3AA00)
Properties
• Terminal module for fail-safe PM-D F 24 VDC PROFIsafe power modules
• Infeed for a new potential group up to the next TM-P terminal module
• Available with screw terminal
• The signal assignment of the AUX1 bus is specified by the feed to the power module of
this potential group.
• Pass-through AUX1 bus with electrical connection to the next potential group to the left
• No access to the AUX1 potential through terminals
Block diagram
Block diagram of the TM-PF30S47-F1 terminal module
1
2
3
4
22
22
0
1
7
8
PM – DF
(1) Backplane bus
(2) Infeed of the power buses to the electronic modules
(3) Terminals with connection to the power module
(4) Uninterrupted AUX1 bus without a connection to the terminals