Siemens Simantic ET 200S - 3.1 Parameters for digital electronic modules

ET 200S
Manual, Edition 10/2005, A5E00514527-01
3-1
Digital electronic modules
3
3.1 3.1 Parameters for digital electronic modules
3.1.1 Parameters for digital input modules
This table shows the parameters for digital input modules:
Table 3-1 Parameters for digital input modules
2DI 24 VDC
High Feature
4DI 24 VDC
High Feature
4DI 24 to 48
VUC High
Feature
2DI/ 4DI 24 VDC
Standard
4DI 24 VDC/SRC
Standard
2DI 120 VAC
Standard
4DI 230 VAC
Standard
Range of values Default
setting
Applicability
Hardware interrupt
3
--- ---
• disable
• Enable
disable Module
--- Diagnostic
interrupt
---
• disable
• Enable
disable Module
Input delay
1
--- ---
• 0.1 ms
• 0.5 ms
• 3 ms
• 15 ms
3 ms Module
Diagnostics:
Short-circuit to M
2
--- ---
• disable
• Enable
disable Module
--- Diagnostics:
Wire break
4
---
• disable
• Enable
disable Module
--- Diagnostics:
Blown fuse
---
• disable
• Enable
disable Module
--- Diagnostics:
No load
voltage
---
• disable
• Enable
disable Module