Siemens Simantic ET 200S - Parameters for Analog Electronic Modules 2 AI RTD Standard, 2 AI TC Standard and 2 AI TC High Feature

Analog electronic modules
4.5 Parameters for analog electronic modules
ET 200S
Manual, Edition 10/2005, A5E00514527-01
4-29
4.5.4 Parameters for analog electronic modules 2AI RTD Standard, 2AI TC Standard
and 2AI TC High Feature
Table 4-33 Parameters for analog input modules RTD, TC
2AI RTD
Standard
2AI TC Standard 2AI TC High
Feature
Range of values Default setting Applicability
Group diagnosis (parameter assignment error,
internal error)
• disable
• Enable
disable Module
Diagnostics: Overflow/underflow
• disable
• Enable
disable Module
Diagnostics:
Wire break
2
Diagnostics: Wire break check
1
• disable
• Enable
disable Channel
Smoothing
• None
• Weak
• Medium
• Strong
None Channel
Temperature
unit
• Celsius
• Fahrenheit
Celsius Module
--- Reference
junction
---
• None
• RTD
None Channel
--- Reference
junction
• None
• Yes (i.e. internal)
None Channel
--- Reference
junction number
---
• None
• 1 to 8
(in the case of the IM151-1
STANDARD and
IM151-1 FO STANDARD)
• 1
(in the case of the IM151-1
BASIC, IM151-1 COMPACT,
IM151-1 HIGH FEATURE)
None Module
Type/range of
measurement
---
• De-activated
• 150 ohm
• 300 ohm
• 600 ohm
• Pt100 Climatic
• Ni100 Climatic Range
• Pt100 Standard
• Ni100 Standard
Pt100
Standard
Channel
--- Type/range of
measurement
---
• De-activated
• Voltage ± 80 mV
• TC-EL type T (Cu-CuNi)
• TC-EL type K (NiCr-Ni)
• TC-EL type B (PtRh-PtRh)
• TC-EL type N (NiCrSi-NiSi)
• TC-EL type E (NiCr-CuNi)
• TC-EL type R (PtRh-Pt)
• TC-EL type S (PtRh-Pt)
• TC-EL type J (Fe-Cu-Ni)
• TC-EL type L (Fe-Cu-Ni)
TC-EL type K
(NiCr-Ni)
Channel