Digital electronic modules
3.20 2RO NO/NC 24 VDC to 48 VDC/5 A, 24 VAC to 230 VAC/5 A digital electronic module (6ES7132-4HB11-
0AB0)
ET 200S
3-82 Manual, Edition 10/2005, A5E00514527-01
3.20 3.20 2RO NO/NC 24 VDC to 48 VDC/5 A, 24 VAC to 230 VAC/5 A digital
electronic module (6ES7132-4HB11-0AB0)
Properties
• Digital electronic module with two relay outputs
• Output current 5 A per output
• Replacement value
• Suitable for solenoid valves, DC contactors, and indicator lights
• Isolated from the supply voltage
• NO and NC contact
Note
If you connect an extra-low voltage system (SELV/PELF) on one channel of the relay
subassembly, you can only use an extra-low voltage system (SELV/PELF) on the other
channel.
General terminal assignment
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal assignment for 2RO NO/NC 24 VDC to 48 VDC/5 A, 24 VAC to 230 VAC/5 A (6ES7132-4HB11-0AB0)
Terminal Assignment Terminal Assignment Notes
1 Common
0
5 Common
1
2 Normally
open
contact
0
6 Normally
open
contact
1
3 Normally
closed
contact
0
7 Normally
closed
contact
1
4 n.c. 8 n.c.
A4 AUX1 A8 AUX1
A3 AUX1 A7 AUX1
• Common
n
, NOC
n
or NCC
n
, channel n
• N: Neutral conductor
• n.c.: Not connected (max. DC 30 V can be connected)
• AUX1: Protective-conductor terminal or potential bus (freely usable
up to 230 VAC)
To Next Page
Loading...
