Siemens Simantic ET 200S - 2 DO 24 VAC to 230 VAC Digital Electronic Module (6 ES7132-4 FB01-0 AB0)

Digital electronic modules
3.18 2DO 24 VAC to 230 VAC digital electronic module (6ES7132-4FB01-0AB0)
ET 200S
Manual, Edition 10/2005, A5E00514527-01
3-73
3.18 3.18 2DO 24 VAC to 230 VAC digital electronic module
(6ES7132-4FB01-0AB0)
Properties
• Digital electronic module with two outputs
• Output current 2 A per output
• Rated load voltage 24 VAC to 48/120/230 VAC
• Replacement value
• Suitable for solenoid valves, AC contactors, and indicator lights
General terminal assignment
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal assignment for 2DO 24 VAC to 230 VAC (6ES7132-4FB01-0AB0)
Terminal Assignment Terminal Assignment Notes
1 DO
0
5 DO
1
2 n.c. 6 n.c.
3 N 7 N
4 n.c. 8 n.c.
A4 AUX1 A8 AUX1
A3 AUX1 A7 AUX1
• DO
n
: Output signal, channel n
• N: Neutral conductor
• n.c.: Not connected (max. DC 30 V can be connected)
• AUX1: Protective-conductor terminal or potential bus (freely usable
up to 230 VAC)