Terminal modules
1.4 TM-P30S44-A0 and TM-P30C44-A0 terminal modules (6ES7193-4CKx0-0AA0)
ET 200S
Manual, Edition 10/2005, A5E00514527-01
1-5
TM-P15x22-01 Technical Specifications (6ES7193-4CEx0-0AA0)
Dimensions and Weight
Dimensions W × H × D (mm)
• Screw-type/spring terminals
• Fast Connect
15 x 119.5 x 43
15 x 142 x 43
Weight Approx. 55 g
1.4 1.4 TM-P30S44-A0 and TM-P30C44-A0 terminal modules
(6ES7193-4CKx0-0AA0)
Properties
• Terminal module for fail-safe PM-E F 24 VDC PROFIsafe power modules
• Infeed for a new potential group up to the next TM-P terminal module
• available in two variants: screw terminal, spring terminal
• Wiring of the fail-safe digital outputs of the PM-E F 24 VDC PROFIsafe
• The signal assignment of the AUX1 bus is specified by the feed to the power module of
this potential group.
• Interrupted AUX1 bus without electrical connection to the next potential group to the left
• Access to the AUX1 potential through terminals A4 and A8
Caution
If high currents occur at DO 2 P and DO 2 M, you must wire terminals 11 and 15 (DO 2
P) and 12 and 16 (DO 2 M) in parallel. Otherwise, the temperature of the terminals
cannot be prevented from rising due to the current load.
To Next Page
Loading...
