Siemens Simantic ET 200S - 5.2 Parameters for the 4 IQ-SENSE

4 IQ-SENSE (6ES7138-4GA00-0AB0)
5.2 Parameters for the 4 IQ-SENSE
ET 200S
5-2 Manual, Edition 10/2005, A5E00514527-01
Parameter assignment
You set the parameters for the 4 IQ-SENSE using the STEP 7 parameter assignment
software.
Configuration rules
STEP 7 as of V5.1 SP3 With STEP 7 as of V5.0, Service Pack 3 or other
configuration software
IM151-1 BASIC: GSD file SIEM80F3.GSx as of
09/02 (as of V1.0)
IM151-1 STANDARD: GSD file SIEM806A.GSx as
of 10/01 (as of V1.10)
IM151-1 FO STANDARD: GSD file SIEM806B.GSx
as of 10/01 (as of V1.5)
IM151-1 HIGH FEATURE: GSD file
SIR380E0.GSx as of 12/01 (as of V1.0)
Contained in the hardware catalog of HW
Config. A GSD file is not required.
IM151-3 PN (6ES7151-3AA10-0AB0)
5.2 5.2 Parameters for the 4 IQ-SENSE
5.2.1 Parameters
Table 5-1 Parameters for the 4 IQ-SENSE
Parameters Range of values Default setting Applicability
Group diagnostics
• Disable
• Enable
Disable Module
Synchronization group
• 1
• 2
• 3
• 4
1 Module
Sensor type
• Retro-reflective sensor
• Diffuse sensor
• De-activated
Retro-reflective sensor Channel
Switching hysteresis
• 5 %
• 10 %
• 20 %
• 50 %
20 % Channel
Time functions
• None
• Return delay
• Pickup delay
• Pickup and return delay
• Momentary impulse
None Channel