Siemens Simantic ET 200S - 5.1 Features of 4 IQ-SENSE

ET 200S
Manual, Edition 10/2005, A5E00514527-01
5-1
4 IQ-SENSE (6ES7138-4GA00-0AB0)
5
5.1 5.1 Features of 4 IQ-SENSE
Properties
The 4 IQ-SENSE has the following features:
• Connection of sensors with IQ-SENSE®, photoelectric proximity switches: for example,
retro-reflective sensors, diffuse sensors, and laser sensors.
• You can connect up to 4 sensors to every module. Each sensor requires a two-wire
cable.
• Excess gain and monitoring
• Time functions, switching hysteresis, synchronization groups that can be assigned
parameters
• Sensitivity and distance values can be specified (
IntelliTeach using the "IQ-SENSE Opto"
FB)
• Teach-in
• Module can be removed and inserted during operation (restart the
Teach-in using the
"IQ-SENSE Opto" function block or the button on the sensor)
• Sensors can be removed and inserted during operation (automatic reassignment of
parameters)
• Supports sensors with alignment tool
• The 4 IQ-SENSE is a single-width (15 mm) electronic module that can be used with the
following terminal modules:
– TM-E15S24-01, TM-E15C24-01 and TM-E15N24-01
– TM-E15S26-A1, TM-E15C26-A1 and TM-E15N26-A1