Siemens Simantic ET 200S - 2 AO I Standard Analog Electronic Module (6 ES7135-4 GB01-0 AB0)

Analog electronic modules
4.21 2AO I Standard analog electronic module (6ES7135-4GB01-0AB0)
ET 200S
Manual, Edition 10/2005, A5E00514527-01
4-103
4.21 4.21 2AO I Standard analog electronic module (6ES7135-4GB01-0AB0)
Properties
• 2 outputs for current output
• Output range:
– ± 20 mA, resolution 13 bits + sign
– 4 to 20 mA, resolution 13 bits
• Isolated from the load voltage L+
General terminal assignment
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal assignment for 2AO I Standard (6ES7135-4GB01-0AB0)
Terminal Assignment Terminal Assignment Notes
1 QI
0
5 QI
1
2 n.c. 6 n.c.
3 M
ana
7 M
ana
4 n.c. 8 n.c.
A4 AUX1 A8 AUX1
A3 AUX1 A7 AUX1
• QI
n
: Current analog output, channel n
• M
ana
: Ground of the module
• n.c.: Not connected (max. DC 30 V can be connected)
• AUX1: Protective-conductor terminal or potential bus (freely usable
up to 230 VAC)