Analog electronic modules
4.3 Basics of Analog Value Processing
ET 200S
4-20 Manual, Edition 10/2005, A5E00514527-01
Compensation by means of a resistance thermometer at the 2AI RTD
If thermocouples that are connected to the inputs of the 2AI TC have the same reference
junction, compensate by means of a 2AI RTD.
For both channels of the 2AI TC module, you can select "RTD" or "None" as the reference
junction. If you select "RTD," the same reference junction (RTD channel) is always used for
both channels.
$,57'
$,7&
,&
0
0
,&
0
0
$EEUHYLDWLRQVXVHG
00HDVXULQJFDEOHSRVLWLYH
00HDVXULQJFDEOHQHJDWLYH
,&&RQVWDQWFXUUHQWFDEOHSRVLWLYH
,&&RQVWDQWFXUUHQWFDEOHQHJDWLYH
$,57'FRQILJXUHGIRU
PHDVXULQJUDQJH3WFOLPDWH
UDQJH
,QVXODWHG
WKHUPRFRXSOHVZLWK
H[WHUQDOFRPSHQVDWLRQ
E\PHDQVRIUHVLVWLYH
WKHUPRPHWHU
FRQQHFWHGWR$,57'
FKDQQHO
Figure 4-1 Compensation by means of the 2AI RTD
To Next Page
Loading...
