Analog electronic modules
4.9 2AI I 2WIRE Standard analog electronic module (6ES7134-4GB01-0AB0)
ET 200S
Manual, Edition 10/2005, A5E00514527-01
4-51
2AI I 2WIRE Standard Technical Specifications (6ES7134-4GB01-0AB0)
Dimensions and Weight
Dimensions W × H × D (mm)
(the total dimensions depend on the selected
terminal module)
15 x 81 x 52
Weight Approx. 40 g
Data for specific modules
Supports isochronous operation no
Number of inputs 2
Cable length
• Shielded
max. 200 m
Parameter length 4 bytes
Voltages, currents, potentials
Rated load voltage L+ (from the power
module)
24 VDC
• Reverse polarity protection
Yes
Power supply of the transmitters Yes
• Short-circuit protection
Yes, (destruction limit 35 mA per channel)
Galvanic isolation
• Between the channels and backplane bus
Yes
• Between the channels and load voltage
L+
no
• Between the channels
no
Insulation tested 500 VDC
Current consumption
• From load voltage L+
max. 80 mA
Power dissipation of the module Typically 0.6 W
Status, interrupts, diagnostics
Diagnostics function
• Group error
Red "SF" LED
• Diagnostic functions readable
Yes
Analog value generation
Measuring principle Integrative
Integration and cycle time/resolution per
channel:
• Integration time can be assigned
parameters
Yes
• Interference frequency suppression in Hz
60 50
• Integration time in milliseconds
16.7 20
• Conversion time in ms
55 65
• Cycle time in ms
Number of active channels per module x conversion
time
• Resolution (including overrange)
4 mA to 20 mA/13 bits
To Next Page
Loading...
