Siemens Simantic ET 200S - Page 189

Analog electronic modules
4.11 2AI I 2WIRE High Speed analog electronic module (6ES7134-4GB51-0AB0)
ET 200S
Manual, Edition 10/2005, A5E00514527-01
4-59
2AI I 2WIRE High Speed Technical Specifications (6ES7134-4GB51-0AB0)
Dimensions and Weight
Dimensions W x H x D (mm)
(the total dimensions depend on the selected
terminal module)
15 x 81 x 52
Weight Approx. 40 g
Data for specific modules
Supports isochronous operation Yes
Number of inputs 2
Cable length
• Shielded
max. 200 m
Parameter length 12 bytes
(4 bytes when used as 6ES7134 4GB50 0AB0)
Voltages, currents, potentials
Rated load voltage L+ (from the power module) 24 VDC
• Reverse polarity protection
Yes
• Short-circuit protection
Yes, (destruction limit 35 mA per channel)
Galvanic isolation
• Between channels and backplane bus
Yes
• Between channels and load voltage L+
no
• Between the channels
no
Permissible potential difference
• Between M
ANA
and M
internal
(U
ISO
)
75 VDC, 60 VAC
Insulation test voltage 500 VDC
Current consumption
• Supply and load voltage L+
max. 35 mA
1
Power dissipation of the module Typically 0.8 W
Status, interrupts, diagnostics
Interrupts
• Hardware interrupt
Can be assigned parameters
2
Diagnostics function
• Group error display
Red "SF" LED
• Diagnostic functions readable
Possible
3
Analog value generation
Measuring principle Instantaneous value encoding
Cycle time/resolution:
• Conversion time in ms (per channel)
0.1
• Cycle time in ms (per module)
1
• Resolution (including overrange)
4 mA to 20 mA/13 bits
0 mA to 20 mA/13 bits