4 IQ-SENSE (6ES7138-4GA00-0AB0)
5.2 Parameters for the 4 IQ-SENSE
ET 200S
5-4 Manual, Edition 10/2005, A5E00514527-01
Operating principle
The diagram below explains the functioning of the synchronization group parameter:
30
,46(16(
,QWHUIDFH
PRGXOH
6ORW
3DUDPHWHUV
6\QFKURQL]DWLRQ
JURXS
Figure 5-1 Synchronization group
Mutual interference is only possible between the sensors of the modules in slot 2 and 6,
because they are in the same synchronization group 1.
Note
Sensors in the same synchronization group must be installed to maintain the minimum
clearance (see sensor package insert) and to prevent mutual interference.
To Next Page
Loading...
