Siemens SIMATIC ET 200SP Function Manual

OPC UA communication
9.4 Using the S7-1500 CPU as an OPC UA client
Communication
Function Manual, 11/2019, A5E03735815-AH
283
Supported instructions
For the following instructions, STEP 7 automatically supplies the parameters if you are using
a client interface and a configured connection to an OPC UA server:
● OPC_UA_Connect
● OPC_UA_NamespaceGetIndexList
● OPC_UA_NodeGetHandleList
● OPC_UA_MethodGetHandleList
● OPC_UA_MethodReleaseHandleList
● OPC_UA_ReadList
● OPC_UA_WriteList
● OPC_UA_MethodCall
● OPC_UA_NodeReleaseHandleList
● OPC_UA_Disconnect

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C