Siemens SIMATIC ET 200SP Operating Instructions

Parameter Add info [errorAddInfo]
Assignment digital input DI.2 703
Assignment CI 704
Filter DI.0 (0.1ms) 705
Filter DI.1 (0.1ms) 706
Filter DI.2 (0.1ms) 707
Filter CI (0.1ms) 708
Assignment digital output DQ.0 709
Assignment digital output DQ.1 710
Assignment digital output DQ.2 711
DQ monitoring 712
DQ substitute values 714
DQ.0 substitute value on error / CPU-Stop 715
DQ.1 substitute value on error / CPU-Stop 716
DQ.2 substitute value on error / CPU-Stop 717
Behavior on CPU stop / failure 723
DQ behavior on CPU stop / failure 724
DQ behavior on failure 725
Trace rate (ms) 731
Trace settings 732
Trace memory type 733
IP address x.n.n.n 755
IP address n.x.n.n 756
IP address n.n.x.n 757
IP address n.n.n.x 758
Subnetmask x.n.n.n 759
Subnetmask n.x.n.n 760
Subnetmask n.n.x.n 761
Subnetmask n.n.n.x 762
Gateway x.n.n.n 763
Gateway n.x.n.n 764
Gateway n.n.x.n 765
Gateway n.n.n.x 766
Stringheader Device Name 767
Device name 768
Unit Ident. Modbus connection 1 769
Modbus TCP Port number connection 1 770
Modbus settings connection 1 771
Enable connection 772
Byte swap for text fields 780
Byte swap for 16 bit tags 781
Byte swap for 32 bit tags (1 # 2, 3 # 4) 782
Word swap for 32 bit tags (1, 2 # 3, 4) 783
Unit Ident. Modbus connection 2 788
Interrupts/diagnostic messages
9.4 Operating errors
Technology module TM SIWAREX WP351 HF
140 Operating Instructions, 01/2020, A5E47521010-AA

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C