Siemens SIMATIC ET 200SP Operating Instructions

Procedure in case of loss of user data
1. Press the ① pushbutton at the upper left in the enclosure for at least 3 seconds.


⇒ LED ② lights up yellow.
2. Enter the IP address of the electronic weighing system in the Mozilla Firefox or
Google Chrome browser within 2 minutes. (Default: 192.168.0.21)
3. Log on as follows:
Logon name: admin
Password: admin
See also
Commissioning the electronic weighing system with TIA Portal (Page 38)
6.3.2 Reading/writing data records
Introduction
Every data record (DR) can only be fully read from the electronic weighing system in the web
server or written to the electronic weighing system. Transfer of a single parameter within a data
record is not possible.
Parameter assignment/addressing
6.3 Web server
Technology module TM SIWAREX WP351 HF
Operating Instructions, 01/2020, A5E47521010-AA 51

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C