Siemens SIMATIC ET 200SP Operating Instructions

Ordering data
B
B.1 Accessories
You can order accessories online: Industry Mall (https://mallstage.industry.siemens.com/mall/
en/b0/Catalog/Products/10038765?tree=CatalogTree)
The following accessories are not included in the scope of delivery:
● Mandatory: BaseUnit of the type U0, article number 6ES7193-6BP00-0xU0
An overview of the BaseUnits that you can use with the electronic weighing system can be
found in the Product Information for the documentation of the ET 200SP Distributed I/O
System (http://support.automation.siemens.com/WW/view/en/73021864).
Information regarding selection of the suitable BaseUnit can be found in the ET 200SP
Distributed I/O System (http://support.automation.siemens.com/WW/view/en/58649293)
system manual and in the ET 200SP BaseUnits (http://
support.automation.siemens.com/WW/view/en/58532597/133300) manual.
● Labeling strips
● Color-coded labels
● Equipment labeling plates
● Shield connection
● Calibration set
Technology module TM SIWAREX WP351 HF
Operating Instructions, 01/2020, A5E47521010-AA 161

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C