Siemens SIMATIC IPC677E - Standards and approvals; CE marking

SIMATIC IPC677E
Operating Instructions, 04/2019, A5E45117996-AA
125
Standards and approvals
10
10.1 CE marking
The device meets the general and safety-related requirements of the following directives and
conforms to the harmonized European standards (EN) published in the official gazettes of
the European Union:
● 2014/30/EU "Electromagnetic Compatibility Directive" (EMC Directive)
The device is designed for the following areas of application corresponding to the CE
marking:
Scope of application
Requirement for
Interference emis-
sion
Immunity to interfer-
ence
Industry
EN 61000-6-4
EN 61000-6-2
AC devices are compliant with EN 61000-3-2 (Transient currents) and EN 61000-3-3 (Voltage
fluctuation and Flicker).
● 2014/35/EU "Electrical equipment for use within specific voltage limits" (Low-Voltage
Directive)
*
Conformance with this standard has been verified according to EN 61010-2-201.
*
*
relevant only for AC devices
● 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
Certificate Box PC (http://support.automation.siemens.com/WW/view/us/10805671/134200).