Siemens SIMATIC IPC677E - Connecting the Device to Networks

Mounting and connecting the device
3.3 Connecting the device
SIMATIC IPC677E
Operating Instructions, 04/2019, A5E45117996-AA
53
Motherboard
DPP1
DPP2
DVI-D
Variant 2
Monitor 1
DP
X
-
-
DVI X
1)
- -
VGA
X
2)
-
-
Monitor 2
DP
-
-
-
DVI
-
-
X
VGA
-
-
-
1)
- via DP to DVI-D adapter
2) - via DP-VGA adapter
3.3.5 Connecting the device to networks
The following options are available for the integration in existing or planned system
environments or networks:
Ethernet
The integrated Ethernet port (10/100/1000 Mbps) can also be used for communication and
data exchange with automation devices such as SIMATIC S7.
This functionality requires the "SOFTNET S7" software package.
PROFINET
PROFINET can be operated via
● Standard Ethernet interfaces (RT)
Additional information
Additional information is available in the catalog and the online ordering system Technical
support (https://support.industry.siemens.com/cs/ww/en/).
See also
SIMATIC NET (http://w3.siemens.com/mcms/automation/en/industrielle-
kommunikation/Seiten/Default.aspx)