Expanding the device and assigning device parameters
6.4 Drives
SIMATIC IPC677E
Operating Instructions, 04/2019, A5E45117996-AA
81
6.4.2 Changing internal SSD
Requirement
● The device is disconnected from the mains and all connecting cables have been
removed.
● The device is open, see important information regarding this under "Opening the Device
(Page 71)".
● An original spare part, that is an SSD of the same type, see information under
"Accessories: Hardware (Page 22)".
Procedure - Removal
1. Remove the marked screws.
2. Remove the marked screws and place the SSD on its side.
To Next Page
Loading...
