Siemens SIMATIC IPC677E - Page 18

Product description
1.4 External design of the device
SIMATIC IPC677E
18 Operating Instructions, 04/2019, A5E45117996-AA
⑦
2 × USB X61/X63
USB 3.1 GEN 2 Type C high current, backward compatible with USB 3.0/2.0/1.1
⑧
2 × USB X60/X62
USB 3.1 GEN 2 Type A high current, backward compatible with USB 3.0/2.0/1.1
⑨
2 × USB X64/X65
USB 3.1 GEN 2 Type A high current, backward compatible with USB 3.0/2.0/1.1
⑩
Fixing screws for
strain relief
⑪
100 V AC to 240
V AC
Power supply connection
⑫
On/off switch You switch on the device with the on/off switch. This requires that the BIOS setup entry "After
Power Failure" is set to "Power On".
The on/off switch does not isolate the device from the power supply. Position "ON", when the "-)"
symbol is pressed inward on the device. Position "OFF" is the delivery state.
⑬
PCI/PCIe expan-
sion cards,
USB on expan-
sion card (option-
al)
2 slots for expansion cards (Slot1/X101, Slot2/X102)