Commissioning the device
4.3 Switching off the device
SIMATIC IPC677E
Operating Instructions, 04/2019, A5E45117996-AA
57
Hardware reset
With the hardware reset, you can restart the device if it does no longer respond to keyboard
or mouse input.
Any running operating system will not shut down safely.
If a hardware reset is performed, the device undergoes a hard reboot.
• Data in the main memory is deleted.
• Data on the hard disk drive may be lost.
• The device may be damaged.
Perform a hardware reset only in the case of an emergency.
Procedure
1. Press the on/off button for more than 4 seconds. The unit switches off.
Information on the position of the buttons is available under: "Side view, left (Page 17)".
See also
General safety instructions (Page 25)
To Next Page
Loading...
