Commissioning
7.5 Transferring optional licenses
SIMATIC MV500
138 Operating Instructions, 03/2021, C79000-G8976-C494-05
Requirement
Note that you can only transfer licenses that are released for the target device (MV500).
Step 1: Installing the Automation License Manager
To install the Automation License Manager (ALM), follow these steps:
1. Install the Automation License Manager (ALM).
You can find the Automation License Manager
(https://support.industry.siemens.com/cs/ww/en/view/114358) on the pages of the
Siemens Industry Online Support.
2. Follow the instructions in the setup program.
Reboot the PC if necessary.
Step 2: Installing the MV plug-in for optical readers
Follow the steps below to install the MV plug-in for optical readers:
1. Install the MV plug-in ("Plug-in for code reader devices").
The MV plug-in is stored in the "UserDoc.zip" file on the reader. You can download this file
via the "Device > Help > User documentation" menu.
2. Follow the instructions in the setup program.
Result: Your PC is now ready for the transfer of licenses to the optical reader.
Requirement
• The optical reader cannot have the reader status "Start".
• The optical reader only accepts one Automation License Manager connection at a given
time. You cannot connect two PCs to the optical reader at once.
• You can only transfer licenses that are released for the target device (MV500). You cannot
transfer a STEP 7 license to the reader, for example.
Step 3: Transferring a license to an optical reader
Proceed as follows to transfer a license to an optical reader:
1. Start the Automation License Manager (ALM).
2. Open the MV plug-in via the menu command "Edit → Connect target systems → Connect
code reading system".
Reaction: The "Connect Target System" dialog opens.
3. Enter the IP address of the optical reader and click on the "OK" button.
Reaction: The optical reader will now appear in the structure tree in the left half of the
window.
4. Click on the drive that contains the license to be transferred.
To Next Page
Loading...
