Siemens SIMATIC MV500 - 13.3.5 PoE switches for power supply; 13.3.6 Cables and other accessories

Scope of delivery and ordering data
13.3 Accessories
SIMATIC MV500
270 Operating Instructions, 03/2021, C79000-G8976-C494-05
13.3.5 PoE switches for power supply
The following PoE switches are suitable for powering the SIMATIC MV500 optical readers via
the Ethernet cable.
Table 13- 12 PoE switches
PoE switches
Article number
SCALANCE X108 POE
6GK5108-0PA00-2AA3
SCALANCE XP208 POE EEC
6GK5208-0UA00-5ES6
SCALANCE XP216 POE EEC
6GK5216-0UA00-5ES6
SCALANCE X308-2M POE
6GK5308-2QG10-2AA2
SCALANCE XR324-4M POE
6GK5324-4QG10-1AR2
6GK5324-4QG10-1HR2
6GK5324-4QG10-3AR2
6GK5324-4QG10-3HR2
SCALANCE XR324-4M POE TS
6GK5324-4QG00-1CR2
6GK5324-4QG10-1CR2
13.3.6 Cables and other accessories
Note
Ordering information
Either one or two cables are required, depending on the application. The cables are not part
of a complete package and must always be ordered
separately.
There is more than one version of each cable type. In this case, you simply need to order one
version per optical reader.
Industrial Ethernet connecting cable
Table 13- 13 Industrial Ethernet connecting cable
Cables
Description
Article number
For Ethernet interface "X1 LAN1"
Industrial Ethernet connecting
cable
M12-90 / M12-90
• Pre-fabricated IE FC trailing
cable GP
2 x 2 (PROFINET Type C)
• M12 connector, 4-pin (D-
coded)
double-sided
• Degree of protection
IP65/IP67
0.3 m
6XV1870-8GE30
0.5 m
6XV1870-8GE50
1 m
6XV1870-8GH10
1.5 m
6XV1870-8GH15
2 m
6XV1870-8GH20
3 m
6XV1870-8GH30
5 m
6XV1870-8GH50
10 m
6XV1870-8GN10
15 m
6XV1870-8GN15