Siemens SIMATIC MV500 - 13.3.7 Mounting plates and calibration card

Scope of delivery and ordering data
13.3 Accessories
SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05
273
Protective caps
Table 13- 17 Protective caps
Connector Description Article number
SCALANCE XP-200
M12 Dust cover
10 pieces, for closing unused inter-
faces
Consisting of 8 x M12 dust cover
with external thread and 2 x M12
dust cover with internal thread
6GK5108-0PA00-2AA3
Micro SD card
Table 13- 18 Micro SD card
Card Description Article number
Micro SD adapter
Adapter for MicroSD cards
6GF3500-8HA01
Micro SD card
Suitable for use with increased
requirements
1 GB
6GK6000-8HT01-0SA0
4 GB
6GK6000-8HT01-0SA2
13.3.7 Mounting plates and calibration card
Table 13- 19 Mounting plates for SIMATIC MV500
Mounting plate
Description
Article number
Mounting plate
• W × H × D: 80 × 80 × 60 mm
• Material: Stainless steel
• Thickness: 4 mm
• Mounting: Metric thread, photo thread
(1/4", 2 x center)
6GF3440-8CA
Support system, tri-plate
• W × H × D: 165 × 175 × 65 mm
• Material: Stainless steel
• Thickness: 4 mm
• For mounting SIMATIC MV500 via
mounting plate
6GF9002-7AD