Siemens SIMATIC NET PROFIBUS - Standards

PROFIBUS NETWORKS
1-7
PROFIBUS Networks SIMATIC NET
6GK1970-5CA20-0AA1 Release 2 05/2000
1.2.1 Standards
SIMATIC NET PROFIBUS is based on the following standards and directives:
IEC 61158–2 to 6: 1993/2000
Digital data communications for measurement and control –
Fieldbus for use in industrial control systems
EN 50170-1-2: 1996
General purpose field communication system
Volume 2 : Physical Layer Specification and Service Definition
PROFIBUS User Organization Guidelines:
PROFIBUS Implementation Guide to DIN 19245
Part 3 (Draft)
Version 1.0 dated 14.12.1995
Fiber Optic Data Transfer for PROFIBUS
Version 2.1 dated 12.98
EIA RS-485: 1983
Standard for Electrical Characteristics of Generators and
Receivers for Use in Balanced Digital Multipoint Systems
SIMATIC NET PROFIBUS-PA is based on the following standards and directives:
EN 50170-1-2: 1996
General Purpose Field Communication System
Volume 2 : Physical Layer Specification and Service Definition
IEC 61158-2: 1993
Fieldbus standard for use in industrial control systems
Part 2 : Physical layer specification and service definition
EN 61158-2: 1994
Fieldbus standard for use in industrial control systems
Part 2 : Physical layer specification and service definition
PTB-Bericht W-53: 1993
Untersuchungen zur Eigensicherheit bei Feldbussystemen
Braunschweig, March 1993
PNO-Richtlinie: 1996
PROFIBUS-PA Inbetriebnahmeleitfaden (Hinweise zur Nutzung
der IEC 61158-2-Technik für PROFIBUS, Art.-Nr. 2.091)