Siemens Simatic S7-300 - Page 21

Contents
xxi
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
7-2 Isolation between the Bus Segments 7-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-3 Block diagram of the RS 485 repeater 7-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-1 SIMATIC TOP connect on a S7-300 8-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-2 Threading the Round-Sheath Ribbon Cable into the Connector 8-5 . . . . . . . .
8-3 Inserting the Connecting Cable into the Front Connector Module 8-8 . . . . . . .
8-4 Front connector module for 32-channel digital modules 8-9 . . . . . . . . . . . . . . .
8-5 Insert the connecting cable into the terminal block 8-10 . . . . . . . . . . . . . . . . . . .
8-6 Spring-loaded terminal block 8-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-7 Principle of Spring-Loaded Connections 8-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-8 Wiring a Digital Module with Terminal Block for a
One-Conductor Connection 8-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-9 Wiring a Digital Module with Terminal Block for a
Three-Conductor Connection 8-17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-10 Wiring with Terminal Block for 2A Module 8-19 . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-11 Terminal Assignment of Analog Module to SIMATIC TOP connect TPA 8-22 .
8-12 SIMATIC TOP connect TPA Terminal Block with Shielding Plate 8-23 . . . . . . .
8-13 Example of Connecting SIMATIC TOP connect TPA to SM 321;
AI 8 x 12 bits 8-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-1 Data Record 1 for Parameters of the Digital Input Modules A-4 . . . . . . . . . . . .
A-2 Data Record 1 for Parameters of the Digital Output Modules A-6 . . . . . . . . . .
A-3 Data Record 1 for Parameters of the Analog Input Modules A-8 . . . . . . . . . . .
A-4 Data Record 1 of the Parameters for SM 331; AI 8 x RTD A-12 . . . . . . . . . . . .
A-5 Data Record 128 of the Parameters for SM 331; AI 8 RTD A-13 . . . . . . . . . . . .
A-6 Data Record 128 of the SM 331; AI 8 x RTD (Continued) A-14 . . . . . . . . . . . . .
A-7 Data Record 128 of the SM 331; AI 8 x RTD (Continued) A-15 . . . . . . . . . . . . .
A-8 Data Record 1 of the Parameters for SM 331; AI 8 x TC A-20 . . . . . . . . . . . . . .
A-9 Data Record 128 of the SM 331; AI 8 x TC A-21 . . . . . . . . . . . . . . . . . . . . . . . . . .
A-10 Data Record 128 of the SM 331; AI 8 x TC (Continued) A-22 . . . . . . . . . . . . . . .
A-11 Data Record 128 of the SM 331; AI 8 x TC (Continued) A-23 . . . . . . . . . . . . . . .
A-12 Data Record 1 for Parameters of the Analog Input Modules A-27 . . . . . . . . . . .
A-13 Data Record 1 of the Parameters for SM 331; AI 8 x 16 bits A-31 . . . . . . . . . . .
A-14 Data record 128 for parameters of the SM 331; AI 8 x 16 bits A-32 . . . . . . . . . .
A-17 Data Record 1 for Parameters of the Analog Output Modules A-37 . . . . . . . . .
A-18 Data Record 1 for Parameters of the Analog Output Modules A-40 . . . . . . . . .
A-19 Data Record 1 for Parameters of the Analog Input/Output Modules A-42 . . . .
B-1 Bytes 0 and 1 of the Diagnostic Data B-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-2 Bytes 2 and 3 of the Diagnostics Data B-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-3 Bytes 4 to 7 of the Diagnostics Data B-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-4 Diagnostic Byte for a Digital Input Channel of the SM 321;
DI 16 x 24 VDC B-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-5 Diagnostic Byte for a Digital Output Channel of the SM 322;
DO 8 x 24 VDC/0.5 A B-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-6 Diagnostic Byte for an Analog Input Channel of a SM 331
with Diagnostics Capability B-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-7 Diagnostic Byte for an Analog Output Channel of a SM 332
with Diagnostics Capability B-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-8 Bytes 0 and 1 of the Diagnostic Data for the SM 338; POS-INPUT B-7 . . . . .
B-9 Bytes 2 and 7 of the Diagnostic Data for the SM 338; POS-INPUT B-8 . . . . .
B-10 Diagnostic Byte for a Channel of the SM 338; POS-INPUT B-8 . . . . . . . . . . . .
C-1 Dimension Drawing of the 483 mm Standard Rail C-2 . . . . . . . . . . . . . . . . . . . .
C-2 Dimension Drawing of the 530 mm Standard Rail C-2 . . . . . . . . . . . . . . . . . . . .
C-3 Dimension Drawing of the 830 mm Standard Rail C-3 . . . . . . . . . . . . . . . . . . . .
C-4 Dimension Drawing of the 2000 mm Standard Rail C-3 . . . . . . . . . . . . . . . . . . .
C-5 Dimension Drawing of the Rail with 160 mm Standard Width C-4 . . . . . . . . . .
C-6 Dimension Drawing of the Rail with 482.6 mm Standard Width C-4 . . . . . . . .