Siemens Simatic S7-300 - Output Ranges of the SM 334;AI 4;AO 2 X 12 Bits

Analog Modules
4-200
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
Output ranges
Use STEP 7 for programming the output ranges.
Table 4-88 Output ranges of the SM 334;AI 4/AO 2 x 12 bits
Selected Type of Output
Output Range Description
Voltage 0 to 10 V You will find the digital
analog values in Section
4.3.2 in the voltage output
range
Default settings of outputs
The default settings of the module are “Voltage” for the output type and “0 to 10 V”
for the output range. You can use this combination of measuring method and
measuring range without parameterizing the SM 334; AI4/AO 2 x 2 bits in STEP 7.