Siemens Simatic S7-300 - 1 General Technical Specifications; SIPLUS S7-300 Modules

1-1
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
General Technical Specifications
What are general technical specifications?
General technical specifications include the following:
• the standards and test values which the modules of the S7-300 programmable
logic controller maintain and satisfy
• the test criteria to which the S7-300 modules were tested.
In this chapter
Section Contents Page
1.1 Standards and Approvals 1-2
1.2 Electromagnetic Compatibility 1-6
1.3 Shipping and Storage Conditions for Modules and Backup
Batteries
1-8
1.4 Mechanical and Climatic Environmental Conditions for Operating
S7-300s
1-9
1.5 Information on Insulation Tests, Protection Class and Degree of
Protection
1-12
1.6 Rated Voltages of the S7-300 1-13
1.7 SIPLUS S7-300 Modules 1-14
1.8 Mechanical and Climatic Ambient Conditions for the Operation of
SIPLUS S7-300 Modules
1-16
1.9 Use of the ET 200M / S7-300 in a Zone 2 Potentially Explosive
Area
1-17
1