Siemens Simatic S7-300 - Page 501

Parameter Sets for Signal Modules
A-33
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
Byte 8
Measuring method, channel group 2
(refer to Table A-26)
Byte 9
Measuring range, channel group 2
(refer to Table A-26)
Byte 10
Smoothing, channel group 2
(refer to Table A-12)
Byte 11
Measuring method, channel group 3
(refer to Table A-26)
Byte 12
Measuring range, channel group 3
(refer to Table A-26)
Byte 13
Smoothing, channel group 3
(refer to Table A-12)
Byte 14
Byte 15
Byte 16
Byte 17
High Byte
Byte 18
Byte 19
Byte 20
Byte 21
High Byte
Low Byte
Low Byte
High Byte
High Byte
Low Byte
Low Byte
Upper limit value
channel group 0;
channel 0
Lower limit value
channel group 0;
channel 0
Upper limit value
channel group 0;
channel 1
Lower limit value
channel group 0;
channel 1
Figure A-15 Data record 128 for SM 331; AI 8 x 16 bits (continued)