Siemens SIMATIC User Manual

General technical data
1.3 Shipping and storage conditions for modules and backup batteries
S7-300 Module data
Manual, 06/2017, A5E00105505-AJ
21
1.3 Shipping and storage conditions for modules and backup batteries
Introduction
S7-300 modules exceed the specifications regarding transport and storage conditions
pursuant to IEC 61131-2. The following information applies to modules that are transported
and stored in their original packaging.
The climatic conditions for temperature and humidity meet:
● IEC 60721-3-3, Class 3K7 for storage.
● IEC 60721-3-2, Class 2K4 for transport.
The mechanical conditions for individual parameters meet IEC 60721-3-2, Class 2M2.
Shipping and storage conditions for modules
Type of condition
Permissible range
Free fall (in shipping package)
≤ 1 m
Temperature - 40 °C to + 70 °C
Barometric pressure from 1140 to 660 hPa (corresponds to an elevation of -1000 to
3500 m)
Relative humidity 10% to 95%, no condensation
Sinusoidal oscillation to
IEC 60068-2-6
5 Hz to 9 Hz: 3.5 mm
9 Hz to 150 Hz: 9.8 m/s
2
Shock to IEC 60068-2-29
250 m/s
2
, 6 ms, 1000 shocks
Shipment of backup batteries
Backup batteries should always be shipped in their original package. Note the regulations
governing the transport of hazardous goods. The backup battery has a lithium content of
approx. 0.25 g.

Siemens SIMATIC Specifications

General

Product type designation	SIMATIC
CPU	Varies by model
Memory	Varies by model
Input/Output	Varies by model
Communication	Varies by model
Programming Language	STEP 7
Operating Temperature	0°C to 60°C (varies by model)
Protection Class	IP20
Category	Programmable Logic Controller (PLC)