Siemens SIMATIC - Parameters of SM 327; DI 8;DO 8 X 24 VDC;0.5 a

Digital modules
3.39 Programmable digital IO module SM 327; DI 8/DO 8 x DC 24 V/0.5 A (6ES7327-1BH00-0AB0)
S7-300 Module data
Manual, 06/2017, A5E00105505-AJ
235
3.39.1 Parameters of SM 327; DI 8/DO 8 x 24 VDC/0.5 A
Programming
The general procedure of programming digital modules is described in the chapter
Programming digital modules (Page 58).
Parameters of SM 327; DI 8/DO 8 x DC 24 V/0.5 A, programmable
The table below lists the programmable parameters of SM 327; DI 8/DO 8 x DC 24 V/0.5 A,
including defaults.
The defaults apply if you have not set any parameters in
STEP 7 .
The comparison illustrates the parameters you can edit:
● in
STEP 7
● using SFC55 "WR_PARM"
● using SFB53 "WRREC" (for GSD, for example).
Parameters set in
STEP 7 may also be transferred to the module using SFCs 56 and 57, and
SFB 53 (refer to the
STEP 7 ) Online Help).
Table 3- 38 Parameters of SM 327; DI 8/DO 8 x DC 24 V/0.5 A
Parameters
Range of val-
ues
Default
Parameter
type
Scope
Data record
number
Programmable using ...
SFC55,
SFB53
PG
Digital output
yes/no
no
dynamic
Channel
1
yes
yes