Siemens SIMATIC User Manual

General technical data
1.7 SIPLUS S7-300 Modules
S7-300 Module data
26 Manual, 06/2017, A5E00105505-AJ
1.7 SIPLUS S7-300 Modules
Definition
SIPLUS S7-300 modules can be used under extended environmental conditions. Meaning of
"extended environmental conditions":
● Extended temperature range of - 25 °C to + 60 °C/70°C
● Moisture condensation/condensation permissible
● increased mechanical stress permissible
Comparison with "standard" modules
The functional scope and technical data of SIPLUS S7-300 modules and of "standard"
modules are identical, with the exception of the environmental conditions.
SIPLUS S7-300 modules have a separate order number (see the table below.)
The mechanical/climatic environmental conditions and the method of testing these have
changed. The SIPLUS S7-300 modules are specified:
● For deployment in harsh environmental conditions,
● For use in hostile environments.
● For extreme temperature ranges.
For more on this, read section Environmental conditions for the operation of SIPLUS S7-300
modules (Page 30).
Project design in STEP 7
SIPLUS S7-300 modules are not included in the hardware catalog. Please design your plant
based on the relevant "standard" modules shown in the table below.

Siemens SIMATIC Specifications

General

Product type designation	SIMATIC
CPU	Varies by model
Memory	Varies by model
Input/Output	Varies by model
Communication	Varies by model
Programming Language	STEP 7
Operating Temperature	0°C to 60°C (varies by model)
Protection Class	IP20
Category	Programmable Logic Controller (PLC)