Siemens SIMATIC User Manual

Preface
S7-300 Module data
4 Manual, 06/2017, A5E00105505-AJ
Name of the manual
Description
Programming manual
Migration from PROFIBUS DP to PROFINET IO
Entry ID: 19289930
Guideline for migration from PROFIBUS DP to
PROFINET IO.
Manual
• CPU 31xC: Technological functions
Entry ID: 12429336
• CD containing examples
Description of the technological functions: posi-
tioning, counting, point-to-point coupling, loop
control.
The CD contains examples of the technological
functions.
YOU ARE CURRENTLY READING the Manual
S7-300 Automation System: Module Data
Entry ID: 8859629
Description of the functions and technical data of
signal/ power supply/ interface modules.
Instructions List
• CPU 31xC, CPU 31x,
IM151-7 CPU, IM154-8 CPU, BM 147-1 CPU,
BM147-2 CPU
Entry ID: 13206730
• CPU 312, CPU 314, CPU 315-2 DP
CPU 315-2 PN/DP, CPU 317-2 PN/DP,
CPU 319-3 PN/DP as of V3.0
Entry ID: 31977679
List of the CPU's instruction set and correspond-
ing execution times. List of executable blocks
(OBs, SFCs, SFBs) and their execution times.
Getting Started
Available anthology of Getting Started manuals:
• S7-300 Getting Started
Entry ID: 15390497
• PROFINET Getting Started Collection
Entry ID: 19290251
Using concrete examples, the Getting Started
documentation provides step-by-step instructions
focused on commissioning a fully functional ap-
plication.

Siemens SIMATIC Specifications

General

Product type designation	SIMATIC
CPU	Varies by model
Memory	Varies by model
Input/Output	Varies by model
Communication	Varies by model
Programming Language	STEP 7
Operating Temperature	0°C to 60°C (varies by model)
Protection Class	IP20
Category	Programmable Logic Controller (PLC)