Siemens SIMOTICS XP 1MB 1 Series User Manual

DANGER
Risk of explosion during operation due to too high surface temperature
This can result in death, serious injury, or material damage.
• Prevent the maximum surface temperature from being exceeded by maintaining the
speci󹪝ed operating conditions.
• Monitor the coil temperature. Use the temperature sensor that is built into the stator winding
for this as speci󹪝ed on the rating plate or extra rating plate.
3.3.10 Marking
Table 3-5 For applications in Zone 1 - IEC/EN/BS/GOST 60079-10-1, GB3836.14
1026 II 2G Ex eb IIB T. Gb FTZU 18 ATEX 0016 ... 0019,
PTB 20 ATEX 3006
1026 II 2G Ex eb IIC T. Gb FTZU 18 ATEX 0016 ... 0019,
PTB 18 ATEX 3005 ... 3013,
PTB 20 ATEX 3006
Ex eb IIB T. Gb IECEx FTZU 18.0024 ... 0027
Ex eb IIC T. Gb IECEx FTZU 18.0024 ... 0027,
IECEx PTB 19.0001 ... 0009
8507 II 2G Ex eb IIB T. Gb EPS 21 UKEX 1 254,
EPS22UKEX1047…050
8507 II 2G Ex eb IIC T. Gb EPS 21 UKEX 1 254,
EPS 21 UKEX 1 273 ... 281,
EPS22UKEX1047…050
1Ex e IIB T. Gb X EAЭC RU C-DE.AA87.B.00156/19,
EAЭC RU C-DE.AЖ58.B.02301/22

1Ex e IIC T. Gb X
Table 3-6 For applications in Zone 2 - IEC/EN/BS/GOST 60079-10-1, GB3636.14
II 3G Ex ec IIA T. Gc BVS 14 ATEX E 081 X,
EPS 18 ATEX 1 202 X,
PTB 12 ATEX 3014
II 3G Ex ec IIB T. Gc BVS 14 ATEX E 081 X,
EPS 18 ATEX 1 202 X,
FTZU 13 ATEX 0040, FTZU 13 ATEX 0055,
FTZU 15 ATEX 0084,
PTB 12 ATEX 3014, PTB 12 ATEX 3016
II 3G Ex ec IIC T. Gc
Ex ec IIA T. Gc IECEx EPS 18.0104X, IECEx PTB 17.0009
Ex ec IIB T. Gc IECEx EPS 18.0104X, IECEx FTZU 13.0029,
IECEx FTZU 13.0031, IECEx FTZU 15.0034,
IECEx PTB 17.0009
Description
3.3Installation
1MB..1/2/3/4 - shaft heights 63 ... 355
36 Operating Instructions, 11/2023, A5E52779900A

Siemens SIMOTICS XP 1MB 1 Series Specifications

General

Brand	Siemens
Model	SIMOTICS XP 1MB 1 Series
Category	Industrial Equipment
Language	English