4.14.5 Tandem operation
If you connect two motors in series in "tandem operation", locate a coupling between the
motors; this coupling should satisfy the Directive 2014/34/EU or the regulations that apply in the
country where the equipment is installed.
4.14.6 Speed limits for converter operation
Observe the information on the rating plate regarding the speed limits for converter operation.
Preparing for use
4.14Converter operation
1MB..1/2/3/4 - shaft heights 63 ... 355
Operating Instructions, 11/2023, A5E52779900A 59
To Next Page
Loading...
