4.4 Delivery
Checking the delivery for completeness
The drive systems are put together on an individual basis. When receiving the delivery,
immediately check whether the scope of delivery matches the accompanying documents. No
claims relating to defects/items missing from the delivery will be accepted if these are submitted
at a later date.
• Report any apparent transport damage to the delivery agent immediately.
• Immediately report any apparent defects/incomplete delivery to your local sales partner.
• Put the operating instructions included in the scope of supply in a secure place.
The rating plate optionally enclosed as a loose item with the delivery is provided to enable
the motor data to be attached on or near the machine or installation.
4.5 Transport and storage
Comply with the following when carrying out any work on the machine:
• Comply with the general safety instructions (Page15).
• Comply with the applicable national and sector-specic regulations.
• When using the motor within the European Union, comply with the specications laid down
in EN50110‑1 regarding safe operation of electrical equipment.
4.5.1 Safety instructions for transport
The information required to correctly attach, lift and transport the machine - such as weight,
center of gravity and attachment points - is provided here:
• Machine dimension drawing and the associated explanations or the technical specications
• Transport data
• Rating plate and lifting plate, if available
• Shipping parts list
• Packaging
Danger when incorrectly lifting and transporting
Danger of death, serious injury, or substantial material damage caused by tipping or falling
transported goods. Comply with the following safety instructions:
• All work must be performed with due caution and care.
• Comply with any notes in the shipping papers.
Preparing for use
4.5Transport and storage
1MB..1/2/3/4 - shaft heights 63 ... 355
42 Operating Instructions, 11/2023, A5E52779900A
To Next Page
Loading...
Need help?
General
