Need help?Do you have a question about the Siemens SINAMICS G120C and is the answer not in the manual?
General| Communication Interfaces | PROFINET, PROFIBUS, USS, Modbus RTU |
|---|---|
| Protection Class | IP20 |
| Ambient Temperature | -10°C to +50°C |
| Storage Temperature | -40°C to +70°C |
| Power Range | 0.55 kW to 132 kW |
| Voltage Range | 380 V to 480 V |
| Output Voltage | 0 V to Supply Voltage |
| Frequency Range | 0 Hz to rated output frequency |
| Control Modes | Vector control with encoder |
| Protection | Overload, overvoltage, undervoltage, short circuit, ground fault |
| Relative Humidity | 5% to 95%, non-condensing |
| Altitude | Up to 2000 m without derating |
To Next Page