Siemens SINAMICS G120C Function Manual

System properties
8
8.1 About this chapter
What can you find in this Chapter?
In this chapter, you will find answers to the following questions:
● How long may I operate my inverter?
● In what time intervals must I initiate an inverter self test?
● What are the probabilities of failure of the safety functions of my inverter?
● How long does it take for my drive to respond when selecting a safety function?
● How long does it take for my drive to respond when the safety function is active and the
motor malfunctions?
● According to which standards are the safety functions of my inverter certified?
● Where can I find the inverter certificate?
● What are the technical data of the Safe Brake Relay?
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD 367

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating