Siemens SINAMICS G120C Function Manual

5.3 Configure PROFIsafe in the higher-level control system
Information on how to configure PROFIsafe communication between a higher-level control
system and inverter is provided in the Internet:
● Configuring a PROFIsafe telegram with Drive ES Basic (http://
support.automation.siemens.com/WW/view/en/64326460)
● Controlling SINAMICS G120 via PROFIsafe, displaying inverter messages on an HMI
(http://support.automation.siemens.com/WW/view/en/61450312)
● Configuring communication via Shared Device (http://support.automation.siemens.com/
WW/view/de/50207311)
Commissioning
5.3 Configure PROFIsafe in the higher-level control system
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD 103

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating