Siemens SINAMICS G120C Function Manual

A.5 Manuals and technical support
A.5.1 Overview of the manuals
You can find manuals here with additional information that can be downloaded
● Operating instructions
Installing, commissioning and maintaining the inverter. Advanced commissioning
– CU250S-2 operating instructions (https://support.industry.siemens.com/cs/ww/en/view/
109478829)
– CU240B/E-2 operating instructions (https://support.industry.siemens.com/cs/ww/en/
view/109478828)
– SINAMICS G120C operating instructions. (https://support.industry.siemens.com/cs/ww/
en/view/109478830)
– Operating instructions SINAMICS G120D with CU240D-2 (https://
support.industry.siemens.com/cs/ww/en/view/109477366)
– Operating instructions SINAMICS G120D with CU250D-2 (https://
support.industry.siemens.com/cs/ww/en/view/109477365)
– SINAMICS G110M operating instructions (https://support.industry.siemens.com/cs/ww/
en/view/109478193)
– SIMATIC ET200proFC-2 operating instructions (https://support.industry.siemens.com/
cs/ww/en/view/109478246)
● Function Manuals
– "Safety Integrated" function manual (https://support.industry.siemens.com/cs/ww/en/
view/109477367)
Configuring PROFIsafe.
Installing, commissioning and operating fail-safe functions of the inverter (this manual).
– "Fieldbus" function manual (https://support.industry.siemens.com/cs/ww/en/view/
109477369)
Configuring fieldbuses
– "Basic positioner" function manual (https://support.industry.siemens.com/cs/ww/en/
view/109477922)
Commissioning the basic positioner
Appendix
A.5 Manuals and technical support
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD 435

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating