EasyManuals Logo

Siemens SINAMICS G120C Function Manual

Siemens SINAMICS G120C
450 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
Parameter Description
p0010 = 95 Drive commissioning parameter filter
Safety Integrated commissioning
p9601 Enable functions integrated in the drive (factory setting: 0000 bin)
Functions that have been
enabled:
Functions that have been enabled:
0 hex None 80 hex STO via Power Module terminals
1 hex Basic functions via on‐
board terminals
81 hex
Basic functions via onboard terminals
STO via Power Module terminals
4 hex Extended functions via
onboard terminals
84 hex
Extended functions via onboard
terminals
STO via Power Module terminals
8 hex Basic functions via PRO‐
FIsafe
88 hex
Basic functions via PROFIsafe
STO via Power Module terminals
9 hex
Basic functions via
PROFIsafe
Basic functions via
onboard terminal
89 hex
Basic functions via PROFIsafe
Basic functions via onboard terminals
STO via Power Module terminals
C hex Extended functions via
PROFIsafe
8C hex
Extended functions via PROFIsafe
STO via Power Module terminals
D hex
Extended functions
via PROFIsafe
Basic functions via
onboard terminals
8D hex
Extended functions via PROFIsafe
Basic functions via onboard terminals
STO via Power Module terminals
p9761 Enter a password (factory setting: 0000 hex)
Permissible passwords lie in the range 1 … FFFF FFFF.
p9762 New password
p9763 Confirm password
Commissioning
5.9 Configuring safety functions and PROFIsafe using STARTER
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD 115

Table of Contents

Other manuals for Siemens SINAMICS G120C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SINAMICS G120C and is the answer not in the manual?

Siemens SINAMICS G120C Specifications

General IconGeneral
Communication InterfacesPROFINET, PROFIBUS, USS, Modbus RTU
Protection ClassIP20
Ambient Temperature-10°C to +50°C
Storage Temperature-40°C to +70°C
Power Range0.55 kW to 132 kW
Voltage Range380 V to 480 V
Output Voltage0 V to Supply Voltage
Frequency Range0 Hz to rated output frequency
Control ModesVector control with encoder
ProtectionOverload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity5% to 95%, non-condensing
AltitudeUp to 2000 m without derating

Related product manuals