Siemens SINAMICS G120C Function Manual

Logging the settings
File name of the log:
…
…
Data backup
Data Storage medium Holding area
Archiving type Designation Date
Log of the settings … … … …
Acceptance tests … … … …
STARTER traces … … … …
PLC program … … … …
Circuit diagrams … … … …
Countersignatures
Commissioning engineer
This confirms that the tests and checks have been carried out properly.
Date Name Company/dept. Signature
… … … …
Machine manufacturer
This confirms that the settings documented above are correct.
Date Name Company/dept. Signature
… … … …
Appendix
A.3 Documentation for acceptance
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
416 Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating