Siemens SINAMICS G120C Function Manual

Instead of legal requirements to apply standards have been defined, an administrative
recommendation to apply JIS (Japanese Industrial Standard) is in place: Japan bases its
approach on the European concept and uses basic standards as national standards (see table).
Table A-14 Japanese standards
ISO/IEC number JIS number Comment
ISO12100 (EN 1050) JIS B 9700, JIS B 9702 earlier designation TR B 0008 and TR B 0009
ISO13849-1 JIS B 9705-1
ISO13849-2 JIS B 9705-1
IEC 60204-1 JIS B 9960-1 Without annex F or route map of the Europe‐
an foreword
IEC 61508-0 to -7 JIS C 0508
IEC 62061 JIS number not yet assigned
Appendix
A.4 Standards and specifications
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD 433

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating