Siemens SINAMICS G120C Function Manual

The SIMATIC-ET‑200pro system allows safe communication limited to the system itself to be
established:
● The ET-200pro system is node on the PROFIBUS or PROFINET.
● Within the ET-200pro system, the interface module with integrated fail-safe control
(IM154 F-CPU) controls the inverter safety functions via PROFIsafe.
Shared Device
6,0$7,&
(7SUR)&
,0+)
6,1$0,&6
*'
6,1$0,&6*
6,1$0,&6*&
)&38
6,0$7,&
(7
&38
352),1(7352),VDIH
6,1$0,&6
*0
Figure 4-4 Shared device is possible with every inverter
The PROFINET "Shared Device" function allows two controls to access the same
PROFINET IO device, e.g. on a SIMATIC ET 200 I/O system or on an inverter. Typical
applications for "Shared Device" are systems, in which a standard CPU and a fail-safe CPU
are used as separate controllers:
● The fail-safe controller (F-CPU) is responsible for the safety functions in the inverter or in
the SIMATIC ET 200 I/O system.
● The standard controller transfers all other signals.
Further information is provided in the Internet:
Which controls support the Shared Device function (http://support.automation.siemens.com/
WW/view/en/44383955).
Installing
4.3 Connection via PROFIsafe
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD 49

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating