Detailed Description
2.2 Functions
Various NC/PLC Interface Signals and Functions (A2)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
2-35
2.2.5.4 Parameterizable protection levels
Parameterizable protection level
The parameter level can be freely parameterized for a variety of functions and data areas.
The protection level is set via operator-panel machine data, designated as follows:
$MM_USER_CLASS_<
Function_DataArea
>
Examples:
$MM_USER_CLASS_READ_TOA Read tool offsets
$MM_USER_CLASS_WRITE_TOA Write tool offsets
$MM_USER_CLASS_READ_PROGRAM Read part programs
$MM_USER_CLASS_WRITE_PROGRAM Write/edit part programs
Default values
On delivery or following standard commissioning, with very few exceptions, the default value
for the protection level will be set to 7, i.e., the lowest protection level.
To Next Page
Loading...
Need help?
General
