Detailed Description
2.5 Workpiece-related actual-value system
Axis Types, Coordinate Systems, Frames (K2)
2-114 Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
2.5 2.5 Workpiece-related actual-value system
2.5.1 Overview
Definition
The term "Workpiece-related actual-value system" designates a series of functions that
permit the user:
• To use a workpiece coordinate system defined in machine data after powerup.
Features:
– No additional operations are necessary
– Effective in JOG and AUTOMATIC modes
• To retain the valid settings for the following after end of program for the next part
program:
– Active plane
– Settable frame (G54-G57)
– Kinematic transformation
– Active tool offset
• To change between work coordinate system and machine coordinate system via the user
interface.
• To change the work coordinate system by operator action (e.g., changing the settable
frame or the tool offset).
To Next Page
Loading...
Need help?
General
