Detailed Description
2.1 Predefined auxiliary functions
Auxiliary Function Output to PLC (H2)
2-8 Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Output after motion
• The traverse movements (path and/or block-related positioning axis movements) of the
current part program block end with an exact stop.
• The auxiliary functions are output after completion of the traverse movements.
• The block change is performed after acknowledgment of the auxiliary functions by the
PLC:
– Output duration one OB1 cycle (normal acknowledgment): after one OB1 cycle
– Output duration one OB40 cycle (quick acknowledgment): after one OB40 cycle
2.1.5 Examples of output behavior
Inputs
The following figures illustrate the differing behavior regarding:
• Output and acknowledgment of the auxiliary function
• Spindle response (speed change)
• Traverse movement (velocity change)
Parameterized output behavior
The binary values stated in the examples under "Spec" refer to the parameterizable output
behavior:
MD22080 $MC_AUXFU_PREDEF_SPEC[ Index ]
To Next Page
Loading...
Need help?
General
